How To Do Netgear Router Setup?

Purchasing a new Netgear router and its setup requires some instructions. If you don't have a computer for setup or installation, you don't have to worry about anything, as the router can also be set up on your laptop, tablet, and smartphones as well.

All you have to do is to connect your wireless device with the Netgear router pre-set wireless settings. Then you can quickly proceed to the phase of its configuration for the internet connection.

The following article provides you with all the essential information for RouterSetup Netgear. Read carefully and follow the steps.

How to Connect Netgear Router?

• Unpack your Netgear router box and plug in the power cable with the electrical circuit and router. You'll see the green lights on the side of your router. It'll assure you that your wireless is Turn-on.
• Make an appropriate connection of your router with the modem and computer. For this, you have to plug-in the network cables from the modem to the router and router to the computer.
• Save the default password of your router, which is mention at the backside of it? It helps you to connect your router with the computer or laptop as it requires a password.
• Turn on your laptop or computer, and hover your mouse to the wireless network connection. See your Netgear router option, click on it, and enter the default password.
• Once it shows you the successful connection, it means you have successfully connected your router with the computer.

After connecting the Netgear router, the next thing you have to do is to the customized settings that are preferable for you. 

You need to login to your Netgear router interface, and that's what you learn in the below section.

How to login Netgear Router?

• To log in your network router, you have to enter either "routerlogin.net" or the default IP Address. Either follow the instruction by reading the Netgear book, or you can do it manually as well.
• To find your default IP Address for login, you have to open the CMD prompt and type "IP config /all." Check for the default a gateway where you can find the IP address.
• After opening the interface, it shows you an authentication popup. You have to put the username and password to access for further settings.
• The username and password provided to you at the backside of your router. Enter the information, and you are all done.

As you have learned the above process, it's time to set up your Netgear router. Just follow the instructions provided below.

How to setup Netgear Router?

• First, connect your router with the computer. The step is mention at the start of the article.
• The next step is to log in on your Netgear interface, which is mention above.
• Go to the "Wireless Settings tab" and give a name to your network name "example." It would be any name, and you can find it when you want to connect with the network.
• After enabling the name, you must need to enable wireless security from the security option. To do that, Select "WEP-AES2", and type your customized security password.
• The next step is to change the Netgear security password that you entered in the Netgear connection step. To do that, click on the "Set Password."
• Once everything completes, reboot your router by pressing the black color router button.
• Now reconnect to the wireless network and enter the details you set up for the router.
• Congratulations! You have successfully set up a Netgear router.

Setting up your router and later found an internet connection issue, the reason would be the Netgear router troubleshooting issues. You can also resolve this issue by following the steps below.

How to Troubleshoot your Netgear router?

• The first step to resolve your Netgear troubleshooting issue is to check whether the LAN Cables connect to the right port or not. Moreover, the LED lights must need to be Turn-on in this case.
• It might also happen outside the range of your Netgear router, so make sure you are inside the ideal range of your router. Else, you can also, buy a wifi range extender to increase your Netgear router range.
• Restart your Netgear router by pressing the black color button available in your router.
• Unplug all the cables and plug-it again.
• Sometimes the issue also causes just because of your router settings. If you do a hard reset, the problem might get resolved.
• To do that, you have to press the reset button available at the backside of your router with the help of a pen or pin.

If the above steps don't resolve you’re troubleshooting the problem, you have to contact the router support at US/Canada Toll-Free: +1 877-778-8740 and get quick support.

In case your Netgear Router not working or facing slow internet connection, no internet connection then reset Netgear router is the best choice to settle down all the issues.

Netgear Router Customer Support Number

You can contact the customer support Service by dialing +1 877-778-8740. It's a Toll-Free number, so call now and get quick help from Get My Wifi Ext experts.

We provide reliable support to fix all router and extender related issues in the shortest time span, so be sure to call or visit us anytime.